Channel 3 - Relay; Channel 4 - Input/Output - Siemens FST020 Function Manual

Maintenance and diagnostics
4.4 Diagnostics
Options
Operation mode is set to Current output
Options
Operation mode is set to Frequency output
Options
Operation mode is set to Pulse output
Related
This parameter is only available if Operation mode is set to Current output, Frequency output
or Pulse output.
Path
4.4.3.2

Channel 3 - relay

4.4.3.2.1 Channel 3 - relay
Description
The channel value can be viewed in this parameter.
Related
This parameter is only available if Operation mode is set to On.
Path
4.4.3.3

Channel 4 - Input/output

4.4.3.3.1 Operation mode - (read only)
Description
The set Operation mode can be viewed in this parameter.
Setting
Default
146
Overflow; Underflow; Fail--safe behaviour active; Cable break; Loop current deviation -
Output current cannot be established (read back deviation > 0.1 mA)
Overflow; Underflow; Fail-safe behaviour active
The pulse output has reached maximum pulse output frequency; Fail-safe behaviour active
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 2 - output →
Error status
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 - relay →
Channel value
Off; Frequency output; Pulse output
Off
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA