3rd Process Value, 4th Process Value, 5th Process Value, and 6th Process Value must be
configured.
Path
3.12.3
1st value
Description
The display 1st Process Value can be selected. This process value is shown in all view
types.
Setting
Default
Related
Path
3.12.4
2nd value
Description
The display 2nd Process Value can be selected.
Setting
Default
Related
This parameter is only available if View is set to Three Values, Six Values or Six Diagnostic
Values.
Path
3.12.5
3rd value
Description
The display 3rd Process Value can be selected.
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Setup → Local display → View 5 → View
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Totalizer 1
Setup → Display → View 5 → 1st value
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Density
Setup → Display → View 5 → 2nd value
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Medium temperature
Setup
3.12 View 5
111