Maintenance and diagnostics
4.8 Simulation
Setting
Default
Related
This parameter is only available if Simulation mode is set to Simulate alarm (ID number).
Path
4.8.3.2.7 Totalizer alarms
Description
The simulation of single and multiple Totalizer alarms can be configured.
Setting
Default
Related
This parameter is only available if Simulation mode is set to Simulate alarm (ID number).
Path
4.8.3.2.8 Input/output alarms
Description
The simulation of single and multiple Input/output alarms can be configured.
Setting
Default
Related
This parameter is only available if Simulation mode is set to Simulate alarm (ID number).
Path
4.8.3.3
Alarm class
Description
The Siemens standard alarm class to be simulated can be configured. The alarm status is
activated on all outputs.
168
Various process alarms can be selected
None selected
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Process
alarms (4)
Totalizer 1 above alarm limit; Totalizer 1 above warning limit; Totalizer 1 below warning
limit; Totalizer 1 below alarm limit
None selected
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Totalizer
alarms
Various input/output alarms can be selected
None selected
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Input/output
alarms
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA