Simulation; Simulation Inputs/Outputs; Channel 2 - Output - Siemens FST020 Function Manual

4.8

Simulation

4.8.1

Simulation Inputs/outputs

4.8.1.1

Channel 2 - output

4.8.1.1.1 Operation mode
Description
Set the output functionality you want the channel to operate.
Setting
Default
Related
The setting of this parameter affects the setting options in parameter Simulation value.
Path
4.8.1.1.2 Simulation
Description
Enables or disables simulation of channel 2 current output.
Setting
Default
Related
Only if this parameter is set to Enabled, then the setting of parameter Simulation value will
be relevant.
Path
4.8.1.1.3 Simulation value
Description
Set the current value to be output on the channel when current output simulation is enabled.
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Off; Current output
Off
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 2 -
output → Operation mode
Disabled; Enabled
Disabled
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 2 -
output → Simulation
Maintenance and diagnostics
4.8 Simulation
159