Setting
Default
Related
This parameter can only be accessed if Status icons is set to Standard.
Path
4.8.3.4
Alarm class
Description
The NAMUR alarm class to be simulated can be configured. The alarm status is activated on
all outputs.
Setting
Default
Related
This parameter can only be accessed if Status icons is set to NAMUR.
Path
4.9
Audit trail
4.9.1
Parameter change log
Displays list of logged parameter changes. (Log shows parameter value before the change,
not the current value.)
Path
4.9.2
Clear parameter change log (write only)
Description
The parameter change log can be reset using this parameter.
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Maintenance alarm; Function check; Process value alarm; Process value warning; Mainte-
nance warning; Maintenance required
None selected
Maintenance and diagnostics → Simulation → Simulation alarms → Alarm class
Failure; Function check; Out of specification; Maintenance required
None selected
Maintenance and diagnostics → Simulation → Simulation alarms → Alarm class
Maintenance and diagnostics → Audit trail → Parameter change log
Cancel; Ok
Cancel
Maintenance and diagnostics
4.9 Audit trail
169