Maintenance and diagnostics
4.5 Peak values
Related
This parameter is only available if Process value is not set to Disabled.
Path
4.5.1.5
Timestamp at minimum
Displays timestamp when minimum value measured.
Related
This parameter is only available if Process value is not set to Disabled.
Path
4.5.1.6
Reset peak values
Description
This command is used to reset the logging of the recorded maximum and minimum values
monitored. The drag pointers will be set to the current value.
Setting
Default
Related
This parameter is only available if Process value is not set to Disabled.
Path
4.5.2
Process value 2
4.5.2.1
Process value
Description
Assign the process value to be monitored.
Setting
Default
150
Maintenance and diagnostics → Peak values → Process value 1 → Minimum value
Maintenance and diagnostics → Peak values → Process value 1 → Minimum value
timestamp
Cancel; Ok
Cancel
Maintenance and diagnostics → Peak values → Process value 1 → Reset logging
Disabled; Volume flow; Mass flow; Sound velocity; Flow velocity; Density; Medium temper-
ature; Kinematic viscosity; Totalizer 1
Disabled
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA