Enable Alarms; Sensor Events (1); Sensor Events (2); Process Events (1) - Siemens FST020 Function Manual

4.2.7

Enable alarms

4.2.7.1

Sensor events (1)

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
Default
Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
4.2.7.2

Sensor events (2)

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
Default
Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
4.2.7.3

Process events (1)

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
05 DSL voltages; 06 DSL storage; 07 Flow measurement; 08 DSL internal; 14 Path 1: No
Signal; 15 Path 2: No signal; 16 Path 3: No signal; 17 Path : No signal; 19 Electronics
temp.; 22 Density calculation; 23 Medium temp. calc.; 24 Pressure calculation; 25 Viscosity
calculation; 26 Sensor temp. comp.; 28 Configuration 1; 31 Sensor temp.
-
Maintenance and diagnostics → Diagnostic events → Enable alarms → Sensor events (1)
34 Invalid flow meas.; 36 Configuration 2; 37 DSL system monitor
-
Maintenance and diagnostics → Diagnostic events → Enable alarms → Sensor events (2)
Maintenance and diagnostics
4.2 Diagnostic events
131