Channel 3 - Relay - Siemens FST020 Function Manual

Maintenance and diagnostics
4.8 Simulation
Setting
Default
Operation mode is set to Current output
Related
Only if parameter Simulation is set to Enabled, the setting of this parameter will be relevant.
Path
4.8.1.2

Channel 3 - relay

4.8.1.2.1 Simulation
Description
Enables or disables simulation of channel 3 relay output.
Setting
Default
Related
Only if this parameter is set to Enabled, then the setting of parameter Simulation value will
be relevant.
Path
4.8.1.2.2 Simulation value
Description
Relay output value to be output when simulation is enabled.
Setting
Default
Related
Only if parameter Simulation is set to Enabled, then the setting of this parameter will be
relevant.
Path
160
0 mA to 25 mA
0 mA
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 2 -
output → Simulation value
Disabled; Enabled
Disabled
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 3 -
relay → Simulation
0; 1
0
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 3 -
relay → Simulation value
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA