Path Settings; Installed Paths; Path 1 - Siemens FST020 Function Manual

3.1.7

Path settings

3.1.7.1

Installed paths

Description
Bit encoded value containing installed paths for clamp-on systems.
Bit 0: Path 1 installed
Setting
Default
Related
Path
3.1.7.2

Path 1

3.1.7.2.1 Sensor frequency
Description
Desired sensor frequency for path 1. Read only.
Setting
Default
Related
Path
3.1.7.2.2 Path geometry
Description
The number of crossings the signal makes through the pipe (Reflect or Direct geometry for
Path 1).
For example:
Direct (1 traverse)
Reflect (2 traverse)
Direct (3 traverse)
Reflect (4 traverse)
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
0 to 31
0
Setup → Sensor settings → Path settings → Installed paths
80000.0 Hz to 4000000.0 Hz
Setup → Sensor settings → Path settings → Path 1 → Sensor frequency
1 to 10
1
Setup
3.1 Sensor settings
29