Simulation Events (1); Simulation Events (2) - Siemens FST020 Function Manual

Maintenance and diagnostics
4.2 Diagnostic events
Setting
Default
Related
Path
4.2.7.9

Simulation events (1)

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
Default
Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
4.2.7.10

Simulation events (2)

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
Default
Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
134
148 Transm. temp. above alarm limit; 149 Transm. temp. below alarm limit; 150 Sensor
signal disruption; 159 Internal error in transmitter
Maintenance and diagnostics → Diagnostic events → Enable alarms → Device events
160 Mass flow simulated; 161 Volume flow simulated; 162 Density simulated; 163 Medium
temp. simulated; 167 Totalizer 1 simulated
Maintenance and diagnostics → Diagnostic events → Enable alarms → Simulation events
(1)
289 Sound velocity simulated; 290 Flow velocity simulated; 292 Kin. viscosity simulated
Maintenance and diagnostics → Diagnostic events → Enable alarms → Simulation events
(2)
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA