1St Value; 2Nd Process Value - Siemens FST020 Function Manual

Related
If Single value or Dosing is selected, 1st process value must be configured.
If Three values is selected, 1st process value, 2nd process value and 3rd process value
must be configured.
If Totalizer or 1 value and graph is selected, 1st process value, Trend scale mode and Trend
log time window must be configured.
If 1 value and bargraph is selected, 1st process value must be configured.
If Six values or Six diagnostic values is selected, 1st process value, 2nd process value, 3rd
process value, 4th process value, 5th process value, and 6th process value must be
configured.
Path
3.9.3

1st value

Description
The display 1st Process Value can be selected. This process value is shown in all view
types.
Setting
Default
Related
Path
3.9.4

2nd process value

Description
The display 2nd Process Value can be selected.
Setting
Default
Related
This parameter is only available if View is set to Three Values, Six Values or Six Diagnostic
Values.
Path
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Setup → Local display → View 2 → View
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Volume flow
Setup → Local display → View 2 → 1st value
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Density
Setup → Display → View 2 → 2nd Process Value
Setup
3.9 View 2
97