Related
Only if Volume flow is marked in Enable simulation, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected Unit.
Path
4.8.2.3
Mass flow
Simulation value
Description
Set the Mass flow value to be simulated.
Setting
Default
Related
Only if Mass flow is marked in Enable simulation, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected Unit.
Path
4.8.2.4
Flow velocity
Simulation value
Description
Set the Flow velocity value to be simulated.
Setting
Default
Related
Only if Flow velocity is marked in Enable simulation, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected Unit.
Path
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Maintenance and diagnostics → Simulation → Simulation process values → Volume flow →
Simulation value
-10800000000.000001 kg/h to +10800000000.000001 kg/h
0.0 kg/h
Maintenance and diagnostics → Simulation → Simulation process values → Mass flow →
Simulation value
-400 m/s to +400 m/s
0.0 m/s
Maintenance and diagnostics → Simulation → Simulation process values → Flow velocity →
Simulation value
Maintenance and diagnostics
4.8 Simulation
163