Maintenance and diagnostics
4.3 Maintenance
4.2.8.3
149 - Transm. temp. below alarm limit
Description
This event can be mapped to an alarm class respective NAMUR status signal.
Setting
Default
Path
4.3
Maintenance
4.3.1
Copy configuration
Description
Copy configuration - copy configurations from the SensorFlash to the device.
Setting
Default
Path
4.3.2
Spare part replacement
4.3.2.1
Transmitter
4.3.2.1.1 Replace transmitter
Description
Only Siemens authorized personnel may replace spare parts.
Access level: Expert user only.
Setting
Default
136
Process value alarm (PA) resp. Out of specification; Maintenance alarm resp. Failure
Process alarm (PA) resp. Out of specification
Maintenance and diagnostics → Diagnostic events → Assign alarm class → 149 - Transm.
temp. below alarm limit
Cancel; OK
Cancel
Maintenance and diagnostics → Maintenance → Copy configuration
Cancel; OK
Cancel
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA