Communication; Service Channel (Usb); Usb Mode (Read Only); Auto Mode - Siemens FST020 Function Manual

Communication

5.1

Service channel (USB)

5.1.1

USB mode (read only)

Description
The USB mode can be read in this parameter.
Options
Related
Path
5.1.2

Auto mode

Description
The Auto mode can be enabled/disabled. When auto mode is enabled, a device connected
via a USB cable is always considered an MSD.
Setting
Default
Related
Path
5.1.3

MSD connect (write only)

Description
This command is used to connect/disconnect to a mass storage device (for example: a PC).
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
USB communication; Mass storage device (MSD)
Communications → Service channel (USB) → USB mode
Disabled; Enabled
Communications → Service channel (USB) → Auto mode
Do nothing; Connect; Disconnect
Do nothing
5
173