parameter is set to On, you will be prompted to enter the password before each HMI
operation.
6.8
Auto logout
Description
The Auto logout function can be be configured. When the parameter is set to Off (default),
you will not be prompted for password for 10 minutes after the last key press. When the
parameter is set to On, you will be prompted to enter the password before each HMI
operation.
Setting
Default
Related
Path
6.9
Logout
Description
The Logout function can be configured.
Setting
Default
Related
Path
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Off; On
Off
Security → Access management → Auto logout
Security → Access management → Logout
Security
6.8 Auto logout
183