Simulation Process Values; Enable Simulation; Volume Flow - Siemens FST020 Function Manual

Maintenance and diagnostics
4.8 Simulation
Setting
Default
Operation mode is set to Pulse output
Related
Only if parameter Simulation is set to Enabled, then the setting of this parameter will be
relevant.
Path
4.8.2

Simulation process values

4.8.2.1

Enable simulation

Description
Select the process value(s) to be simulated.
Setting
Default
Related
Only if process values are marked in this parameter, the setting of Simulated value under
each relevant process value becomes relevant.
Path
4.8.2.2

Volume flow

Simulation value
Description
Set the Volume flow value to be simulated.
Setting
Default
162
0.0 pulses/s to 12500.0 pulses/s
0.0
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
input/output → Simulation value
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Medi-
um temperature
None selected
Maintenance and diagnostics → Simulation → Simulation process values → Enable simula-
tion
-10800000000.0 m /h to +10800000000.0 m
3
0.0 m /h
3
/h
3
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA