Capacity Available (Read Only); Data Logging; Activation; Data Logging Mode - Siemens FST020 Function Manual

4.7.4

Capacity available (read only)

Description
Free capacity of installed SensorFlash.
Shows INSERT CARD if card is not installed.
Setting
Default
Related
Path
4.7.5

Data logging

4.7.5.1

Activation

Description
Activation - turns on and off data logging activation
Setting
Default
Related
If this parameter is set to Enabled, the parameters Logging value 1 through Logging value 20
can be configured.
Path
4.7.5.2

Data logging mode

Description
Select between a momentary value or an averaged value calculated over one logging
interval.
Setting
Default
Related
Path
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
GB
Maintenance and diagnostics → SensorFlash → Capacity available
Off; On
Off
Maintenance and diagnostics → SensorFlash → Data logging → Activation
Log instantaneous, Log average value
Log instantaneous
Maintenance and diagnostics → SensorFlash → Data logging → Data logging mode
Maintenance and diagnostics
4.7 SensorFlash
157