How To Change The Display Mode On The External Fish Finder Screen - Furuno FCV-2100 Operator's Manual

1.20.1 How to change the display mode on the external fish finder
screen
You can change the display mode on an external monitor by doing the following:
1. Place the cursor inside the external fish finder screen, then right-click. The [Exter-
nal Fish Finder] menu appears.
2. Select [Display].
3. Select the drop-down icon for the [Mode] setting, on the right-side of the menu.
The drop-down options appear.
4. Select the appropriate option:
[LF/HF] : High and low frequency images.
[HF]
[LF]
5. If you select [LF] or [HF] at step 4, go to the step 6.
If you selected [HF/LF] at step 4, set the screen division from the [Display Division]
menu item, directly below the Mode menu item.
6. Select [Apply] to apply the changes and delete or edit a different mode. Select
[OK] to apply the changes and close the menu. Select [Cancel] to cancel any
changes made and close the menu.
Sounder
HF
Mode
LF
Display Division
Display
Colors
Measurement
Hue
System
Range
Background
TX/RX
Depth Size
Calibration
Depth Scale
HF
Bottom Discrim
LF
Bottom Discrimination Legend
Stabilization
Service
: High frequency images only.
: Low frequency images only.
Display
LF/HF
Vertical
64
Normal
White
Normal
Right
Probability
Off
OK Apply Cancel
1. OPERATION
1-29