How To Use The Instantaccess Bar - Furuno FCV-2100 Operator's Manual

1. OPERATION
1.3.4

How to use the InstantAccess bar

The InstantAccess bar
compact icon-based format. You can show/hide the InstantAccess bar™ at any time
using the icon at the top of the bar. Another method to show/hide the InstantAccess
bar™ is to place the cursor on a non-interactive section of the display, then right-click.
To access a feature or function, select the appropriate icon. The menu bar for that icon
appears. The example below shows the [Sounder] section of the InstantAccess bar™.
How to Create and Remove Shortcuts
Most icons displayed on the InstantAccess bar™ can be stored as shortcuts. The
shortcuts are displayed when the InstantAccess bar™ is hidden. Up to ten icons can
be assigned to the shortcut bar. To assign an icon to the shortcut bar, do the following:
Display the icon you
want to store,
highlight it with the
cursor, then press
and hold the left
button.
Note: [Internal Settings] save slot icons (see section 1.27) cannot be stored as short-
cuts.
To remove an icon from the shortcut bar:
1. Hide the InstantAccess bar
2. Highlight the icon to be removed from the shortcut bar.
3. Drag and drop the icon away from the shortcut bar.
The icon is no longer shown in the shortcut bar.
1-4
™
contains the menus for functions and features, all in one
When the "arrow" inside the icon points down, as shown here,
it indicates that the InstantAccess bar
Place the cursor over an icon to
highlight it and show the tooltip.
Drag the icon
away from the
menu with the
trackball. The
shortcut bar
appears.
™
to show the shortcut bar.
™
TM
is hidden.
The small triangle "
the bottom right of an icon,
indicates that there is a
menu available for that icon.
Drag and drop
the icon to the
shortcut bar.
" , at
The icon is
now stored
on the
shortcut bar.