Table of Contents
Advertisement
1.3.5
InstantAccess bar™ icons list
The table below shows the InstantAccess bar™ menus, their respective menu items
and available options, along with a brief description. For full details on each menu/
function, see the respective sections of the manual.
Icon
Menu
Item
[Sounder] menu.
Select this icon to access the sounder-related settings.
[Interference Rejection] icon.
Select this icon to access the [Interference Rejection] function (see
section 1.9 for details).
[Smoothing] icon.
Select this icon to access the [Smoothing] function (see section 1.10 for
details).
[Clutter] icon.
Select this icon to access the clutter (low level noise reduction) function
(see section 1.11 for details).
[Zoom Mode] icon.
Select this icon to access the zoom functions (see section 1.12 for de-
tails).
[Measure Fish Size] icon.
Select this icon to access the fish measurement area settings (see
section 2.2.2 for details). The available settings are:
Measure fish at any location on the display.
See section 2.2.2 for details.
Only measure fish within a specified depth range.
See section 2.2.3 for details.
Only measure fish that appear near the seabed.
See section 2.2.4 for details.
Only measure fish within a specified are on the display.
See section 2.2.5 for details.
[External Fish Finder Gain] icon.
Select this icon to adjust the external fish finder gain (see section 1.6 for
details). The available options are:
Select to adjust the high frequency external fish finder gain.
Select to adjust the low frequency external fish finder gain.
Note: The [External Fish Finder Gain] icon is not available when there is
no external fish finder connected, or if the [External Fish Finder Window]
menu option is set to [On] at installation.
[Display] menu.
Select this icon to access the display-related settings.
Description/Options
1. OPERATION
1-5
Advertisement
Table of Contents
Troubleshooting
