How To Show/Hide The Fish Size Graph; How To Set The Method Of Measurement; Entire Area - Furuno FCV-2100 Operator's Manual

2.2.1

How to show/hide the fish size graph

To show/hide the [Vertical Target Graph], do the following:
1. Select the [Graph] icon (
menu.
2. Select the [Vertical Target Graph] icon (
and the [Vertical Target Graph] appears.
To close the graph, select the [Close Window] icon (
2.2.2

How to set the method of measurement

The FCV-2100 has four methods of fish size measurement.
To select, or change, the method of measurement, do the following:
1. Select the [Sounder] icon (
bar™. The [Sounder] menu bar appears.
2. Select the [Fish Size Measurement] icon (
menu options appear.
3. Select the appropriate method of measurement icon, re-
ferring to the figure to the right.
2.2.3

Entire Area

This method measures all detected fish. When this method is active, the area of de-
tection (the entire screen) is surrounded with a yellow box, as shown in the example
figure below.
1. Select the [Sounder] icon (
menu bar appears.
2. Select the [Fish Size Measurement] icon (
3. Select the [Entire Area] icon (
) from the InstantAccess bar™ to show the [Graph]
) from the InstantAccess
) from the InstantAccess bar™. The [Sounder]
Detection range Detection range
). The icon changes to a green color
), or select the graph icon.
). The
). The menu options appear.
).
Measurement marker
(yellow box)
2. GRAPH FUNCTIONS
[Entire Area]
[Specific Range]
[Bottom Trace]
[Specific Area]
2-3