How To Change The Range; How To Change The Range For Fcv-38 And External Echo Sounders Where "External Fish Finder Window" Is Set To "Off" At Installation - Furuno FCV-38 Manual

1. OPERATION
1.9

How to Change the Range

The range setting dictates the on-screen display distance and can be changed to suit
your requirements. The system has eight presets, each of which can be changed. The
default setting for the presets is listed in the table below.
Unit of measurement &
Connected fish finder
m (FCV-38)
m (DFF3 - On)
ft (FCV-38)
ft (DFF3 - On)
fa (FCV-38)
fa (DFF3 - On)
Hiro* (FCV-38)
Hiro* (DFF3 - On)
pb (FCV-38)
pb (DFF3 - On)
*: Japanese unit of depth measurement.
Note: You can change the preset range for of the presets, according to your require-
ments. See section 4.7.1 or section 4.8.4.
1.9.1 How to change the range for FCV-38 and external echo sound-
ers where "External Fish Finder Window" is set to "Off" at in-
stallation
Where [External Fish Finder Window] is set to [Off] at installation, the range is applied
to both the FCV-38 and the external fish finder.
To change the range, follow the procedure below.
Note: Range cannot be adjusted manually when auto range is active.
1. If the header is not displayed, put the cursor at the top edge of the display to show
it.
2. Click the [RANGE] indication on the header. The indication is now highlighted in
a green color.
3. Scroll to change the range. The display changes automatically with each change
in range.
1-20
1 2
10 20
5 10
30 60
15 30
5 10
3 5
6 12
4 8
6 12
3 5
SB
Preset ranges
3 4 5
40 80 150
20 40 80
120 250 500
60 120 200
20 40 80
10 20 40
25 50 100
15 30 50
25 50 100
10 30 50
[ RANGE ] indication
6 7 8
300 500 1000
150 300 1500
1000 1600 3000
400 1000 4500
160 250 500
80 150 900
200 300 600
100 200 1200
200 300 600
100 200 900
RANGE
RANGE
40
40