Still Images & Data Recording; Still Images (Screenshots); How To Set The Save Destination For Images - Furuno FCV-2100 Operator's Manual

3. STILL IMAGES & DATA RECORD-
ING
3.1

Still Images (Screenshots)

You can save a screenshot of the on-screen display and play it back at any time. This
is helpful when comparing fish school sizes.
Note: This function is not available on sub monitors.
3.1.1

How to set the save destination for images

Images can be saved to the Processor Unit's internal memory, or to an external de-
vice. The Processor Unit can hold up to 99 image files. For external devices, the num-
ber of files that can be saved depends on the capacity of the external device.
To set the save destination for images, do the following:
1. Select the [Advance Settings] icon from the InstantAccess bar™.
2. Select the [Advanced Settings] icon from the Menu bar. The [Advanced Settings]
menu is displayed.
3. Double-click [System] to show the [System] section of the menu.
4. Select [Setting]. The [Setting] options are shown to the right-side of the menu.
5. Select the [Screenshot Recording Destination] option (indicated in the figure be-
low). The options button is now visible.
6. Select the options button, then select the appropriate destination. The available
options are:
[Internal Memory] - saves the images to the Processor Unit.
[External Memory] - saves the images to the connected external device.
7. Select [Apply], then [OK], in that order. The destination is now set for saved imag-
es.
Recording destination option
Options button
3-1