Measurement Menu - Furuno FCV-2100 Operator's Manual

4. ADVANCED SETTINGS
Menu item
[Background]
[Depth Size]
[Depth Scale]
[Sonde Mark]
[Sonde Mark Color]
[Sonde Mark Width]
[Transparency]
4.4

Measurement Menu

Graph-related measurement can be set from the [Measurement] section of the [Ad-
vanced Settings] menu. For further details on each setting, see section 2.2.7.
FCV-2100 [ver 02524476-xx.xx]
4-4
Change the background color. Select [Custom] to set a custom back-
ground color, or select a preset color. The [Custom] color here is not
the same as the [Hue] → [Custom] color. However, the custom color
can be set in a similar manner.
Select the size at which the indication for depth is displayed.
Adjust the location at which the depth scale is displayed.
Shows the depth of the net sonde transmitter. You can display several
sonde marks on-screen. The example below shows three sonde
marks.
Set the color for the displayed sondes.
1) Select the detail icon (
dow.
2) Select the appropriate sonde number at the right-side of the color
selection pop up window.
3) Adjust the slide bar to change the displayed color of the sonde.
4) Select [OK] to confirm the changes, or select [Cancel] to cancel the
changes.
Set the thickness at which the sonde line is displayed on-screen. Se-
lect a higher setting to increase the thickness.
Adjust the level of transparency for the fish graph. A higher setting in-
creases the transparency, however the graph bars, scale and indica-
tions in the graph are not made transparent.
Sounder
Display
Graph Display
Measurement
Graph Scale End
Alarm
Distributed Scale Start
External Echo Sounder
Distributed Scale End
Sounder
HF
Graph Peak
LF
Upda Upda p p ting ting g g
Ca Cali Cali Cali C li Cali Cali Cali Cali brat brat brat brat b t brat brat b brat ati i on ion ion ion ion ion ion o
Description
) to show the color selection pop up win-
Measurement
Vertical
39
3%
50%
1st
Cyc Cyc y y le le RT RT
Sonde marks