How To Copy Images From Internal To External Memory - Furuno FCV-2100 Operator's Manual

3. STILL IMAGES & DATA RECORDING
3.1.5

How to copy images from internal to external memory

You can copy image files from the internal memory of the Processor Unit to an exter-
nal device (for example a USB flash drive).
1. Press and hold the wheel on the trackball to show the replay screen.
2. Select the appropriate icon at the bottom-right of the screen.
Copy all image files to
the external device.
The images are copied from the Processor Unit to the connected external device.
Note 1: If the external device does not have the capacity to store the image files, the
error message "Not enough memory to copy screenshot. Delete unnecessary files."
appears.
To rectify this problem, delete unnecessary files from the device to create room for the
image files, then repeat the above procedure.
Note 2: If no external device is connected, the [Copy] and [Copy All] icons are gray in
color and not available.
3.1.6 How to delete image files
You can delete image files in two manners: individually, or all at once. To delete image
files, do the following:
1. Press and hold the wheel on the trackball to show the replay screen.
2. At the bottom-right of the screen, select the appropriate icon.
A confirmation message is displayed.
3. Select [Yes] to proceed with the file deletion. Select [Cancel] to abort the file de-
letion.
3-4
Delete all
images.
Copy the current image
file to the external device.
Delete images
singularly.