How To Reject Clutter For External Fish Finders Where - Furuno FCV-2100 Operator's Manual

1.11.2 How to reject clutter for external fish finders where [External
Fish Finder Window] is set to [Off] at installation
1. Select the [Advanced Settings] icon (
vanced Settings] menu appears.
2. Select the [Advanced Settings] icon (
The [Advanced Settings] window appears.
3. Select the [Sounder] item from the [External Fish Finder] menu, on the left-side of
the window. The external fish finder settings are shown on the right-side of the
window.
4. Select the [Clutter] setting. The drop-down options box appears at the far right-
side of the window.
5. Select the drop-down box, then select the appropriate noise reduction level. A
high value setting reduces more noise, but can also remove weak echoes (small
targets).
6. Select [Apply] to save the current changes and change or adjust other settings.
Select [OK] to save the current changes and close the menu window.
Select [Cancel] to abort all changes and close the menu window.
1.11.3 How to reject clutter for external fish finders where [External
Fish Finder Window] is set to [On] at installation
1. Place the cursor inside the external fish finder screen, then right-click. The [Exter-
nal Fish Finder] menu appears.
2. The [Sounder] menu is already selected.
3. Select the [Clutter] setting ([40%] in the example figure above). The drop-down
options box appears at the far right-side of the window.
4. Select the drop-down box, then select the appropriate noise reduction level. A
high value setting reduces more noise, but can also remove weak echoes (small
targets).
5. Select [Apply] to save the current changes and change or adjust other settings.
Select [OK] to save the current changes and close the menu window.
Select [Cancel] to abort all changes and close the menu window.
) from the InstantAccess bar™. The [Ad-
) from the [Advanced Settings] menu.
1. OPERATION
1-21