How To Change Graph Settings - Furuno FCV-2100 Operator's Manual

2.2.7

How to change graph settings

Several aspects of the graphs can be changed. To change graph settings, do the fol-
lowing:
1. Select the [Advanced Settings] icon (
vanced Settings] menu appears.
2. Select the [Advanced Settings] icon (
The [Advanced Settings] window appears.
3. Select [Measurement]. The [Measurement] settings appear in the right-side of the
window.
Measurement settings Measurement settings
4. Referring to the table below, select the measurement option to change, then
change the settings as required.
Measurement
setting
[Graph Display] Set the orientation of the graph. Select [Horizontal] or [Vertical] as required.
[Graph Scale Set the maximum fish size to be displayed
End] on the graph.
(See the figure to the right.)
[Distributed Scale Set the percentage of distribution at which
Start] data starts to appear on the graph. (See the
figure to the right.)
[Distributed Scale Set the percentage of distribution at which
End] data stops appearing on the graph. (See
the figure to the right.)
[Graph Peak] Set the number of peak measurement to
display on the graph.
[Updating Cycle] Set the interval at which to update graphs.
) from the InstantAccess bar™. The [Ad-
Description
Vertical graph bars
2. GRAPH FUNCTIONS
) from the [Advanced Settings] menu.
Horizontal graph bars
[ Distributed Scale End ] [ Distributed Scale End ]
[ Distributed Scale Start ] [ Distributed Scale Start ]
[ Graph Scale End ] [ Graph Scale End ]
[P1]: Show only the highest peak
measurement.
[RT]: Real Time
[1s], [2s], [3s]: Interval, in sec-
onds.
2-7