4.7.3
Control unit menu
You can adjust Trackball Control Unit settings from the [Control Unit] section of the
[System] menu.
FCV-2100 [ver 02524476-xx.xx]
Menu item
[Key Beep]
[Brightness]
Sounder
Display
Key Beep
Measurement
Brightness
Alarm
System
Range
TX/RX
Control Unit
User Interface Settings
Calibration
Stabilization
Mode
Tests
Service
Set to [On] or [Off] to enable or disable the key beeps.
Adjust the brightness for the Trackball's power LED and
the key back-light. Set to [0] to turn the Trackball Control
Unit lights off.
Control Unit
On
0
Apply
OK
Description
4. ADVANCED SETTINGS
Cancel
4-11