Table of Contents
Advertisement
1. OPERATION
1.20
External Fish Finder Display
You can view an external fish finder's echoes on a sub display if your system config-
uration meets the following requirements:
• Two monitors (main and sub-monitor) connected.
• External fish finder is connected to the FCV-2100.
• [External Fish Finder Window] is set to [On] at installation.
To show the external fish finder echoes on the sub display, do the following:
1. Select the [Display] icon (
pears.
2. Select the [External Echo Sounder] icon (
ternal fish finder's echoes. Further, the [External Echo Sounder] icon changes to
a green color.
Main monitor: Echoes from
FCV-2100 fish finder displayed.
Note: When the external fish finder display is active, settings changes and adjust-
ments made to the FCV-2100 display are not reflected on the external display (with
the exception of language and units of measurement). Settings changes and adjust-
ments for the external fish finder must be done from the sub monitor. Place the cursor
inside the external fish finder screen, then right-click to display the external fish finder
menu. (See section 4.8 for details.)
1-28
) from InstantAccess bar™. The Display menu ap-
). The sub monitor displays the ex-
Sub monitor: Echoes from
external fish finder displayed.
Advertisement
Table of Contents
Troubleshooting
