How To Load Settings - Furuno FCV-2100 Operator's Manual

1.27.2

How to load settings

Previously saved settings can be loaded from their save location, either internal or ex-
ternal location, at any time.
Note: When the load procedure is complete, previous settings cannot be restored.
Check that the settings to be loaded are correct before starting the procedure.
How to load settings from internal memory
1. Select the [Advanced Settings] icon (
vanced Settings] menu appears.
2. Select the [Internal Setting] icon (
pear.
3. Select the [Load Settings] icon (
4. Select the load slot you want to use. The system applies the loaded settings.
How to load settings from external memory
Note: This method requires connection to an external memory device. If there is no
device connected, the [Load External Unit Settings] icon shown in the procedure be-
low are not available.
1. Select the [Advanced Settings] icon (
vanced Settings] menu appears.
2. Select the [External Setting] icon (
pear.
3. Select the [Load External Unit Settings] icon (
available settings files appears.
4. Select the settings file to load.
5. Select [OK] to close the pop up.
[ Load Settings ] icon [ Load Settings ] icon
Load slot icons. Light-gray: Available to load from.
Dark-gray: No data saved.
) from the InstantAccess bar™. The [Ad-
). The internal setting save/load icons ap-
). The load slot icons appear.
) from the InstantAccess bar™. The [Ad-
). The external setting save/load icons ap-
). A pop up window listing the
1. OPERATION
1-43