Specific Range - Furuno FCV-2100 Operator's Manual

2. GRAPH FUNCTIONS
2.2.4

Specific Range

This method produces three marker lines, one vertical and two horizontal, which can
be adjusted to set the specified range.
1. Select the [Sounder] icon (
menu bar appears.
2. Select the [Fish Size Measurement] icon (
3. Select the [Specific Range] icon (
Measurement location Measurement location
4. Adjust the area to suit your requirements.
Drag and drop the upper limit bar to move the upper and lower range limit bars
together.
Drag and drop the lower limit bar to adjust the width of the range.
Drag and drop the measurement location to set where the fish measurements are
made.
2-4
) from the InstantAccess bar™. The [Sounder]
). The menu options appear.
).
The area between the upper
limit bar and lower limit bar is
the "specified area" .
Upper limit bar
Lower limit bar