Power Over Ethernet Specifications; Power Over Ethernet Defaults - Alcatel-Lucent OmniSwitch 6560 Hardware User's Manual

Managing Power over Ethernet (PoE)

Power over Ethernet Specifications

The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
Power Supplies." .
IEEE Standards supported
PoE Class Detection
Range of inline power per port
Maximum PoE power per chassis

Power over Ethernet Defaults

The following table lists the defaults for PoE configuration:
Parameter
Description
PoE operational status
Power available to a
port
Power available to an
entire slot
Power priority level for
a port
Capacitor detection
method
Priority disconnect sta-
tus
OmniSwitch 6560 Hardware Users Guide
Command(s)
lanpower slot service
lanpower power
lanpower slot maxpower
lanpower priority
lanpower capacitor-detec-
tion
lanpower slot priority-dis-
connect
December 2019
Power over Ethernet Specifications
IEEE 802.3; 802.af; 802.3at;802.3bt
Supported
802.3at ports - 3000-30000 milliwatts
802.3bt ports - 3000-95000 milliwatts
See "Power over Ethernet
Default Value/Comments
Disabled
802.3at ports - 30000 milliwatts
802.3bt ports - 95000 milliwatts
See "Power over Ethernet
low
Disabled
Enabled
Chapter 3, "Chassis and
Budget".
Budget".
page 4-3