Table of Contents
Advertisement
Telemetry System
The R3008SB receiver features bi-directional communication with a T-FHSS Air Futaba transmitter
using the S.BUS2 port. Using the S.BUS2 port, an impressive array of telemetry sensors may be utilized.
It also includes both standard PWM output ports and S.BUS output ports.
* Telemetry is available only in the T-FHSS Air.
* The telemetry function requires the corresponding receiver (R3008SB).
* The T12K will enter and keep the ID number of the R3008SB that it is linked to.
* When using multiple receivers with one transmitter, telemetry cannot be used.
Receiver
S.BUS2
Connector
●Slot No.
Servos are classified by channel, but sensors
are classified by "slot". Since the initial slot
number of the T12K is preset at each sensor,
the sensors can be used as is by connecting
them. There are 1 ~ 31 slots.
<Before Use>
38
●Telemetry sensor (sold separately)
T12K
Aircraft data can be checked in the transmitter by
connecting various telemetry sensors to the S.BUS2
connector of the receiver.
Power battery voltage is
displayed at the transmitter.
Info
voltage
Battery voltage is
displayed at the transmitter.
Switch
Terminal box
Temperature
Sensor
RPM
Sensor
Info
HUB
Altitude
Sensor
Info
GPS
Sensor
HUB
Info
HUB
Slot 1
Slot 2
Slot 3 ～ 5
Voltage
Slot 6 ～ 7
Sensor
Slot 8 ～ 15
Slot 16
***Sensor
Slot 17
***Sensor
Slot 31
Advertisement
Table of Contents
