Telemetry System - FUTABA 7PX User Manual

With the telemetry system, the running status can be displayed at the transmitter and also
recorded as a data log by installing various sensor units to the chassis
(The T-FHSS SR, S-FHSS and FASST systems do not have a telemetry function.)
-The sensor data can be checked at the transmitter by connecting the telemetry sensor sold
separately to the S.BUS2 connector of the R334SBS receiver.
-To log this information, a start/stop switch is set by switch setting (page 69).
The log data recorded on a microSD card can be converted to CSV format by the telemetry
log converter released at our home page. When copying or moving the log file, always select
both .FLI and .FLD files.
-The figure is an example of connection of a telemetry sensor. The data of up to the follow-
ing 3 types of sensor and the receiver power supply voltage can be transmitted by using the
3-way extension cord or double extension cord sold separately.
The receiver power supply can also be connected to the S.BUS2 connector or channel 1 to 4
connector. A receiver power supply voltage sensor is unnecessary.
Connection
diagram
Transmitter
Signal
T-FHSS Receiver
Connect to S.BUS2 Connector
-Usable sensor options(As of May 2017)
*Temperature sensor (SBS-01T) Perfect for engine head, etc.
*Temperature sensor (SBS-01TE) Used by attaching to a motor, etc.
*RPM Sensor (SBS-01RM) Measures speed over the 0 to 999,900rpm range.
*Voltage Sensor (SBS-01V) Measures external power supply voltages up to 100V.
*Current sensor (SBS-01C) Measures external power supply voltages up to 70V, capacity and consumption capacity.
*GPS sensor (SBS-01/02G) Detect the GPS and measure the position and speed of the car body.
*Compatibility with non-Futaba sensors (Castle TL0). (Refer to the sensor instruction manual for more information.)
152
1M23N32602_7PX_E.indb 152

Telemetry System

Power battery voltage is
displayed at the transmitter.
Info
Info
HUB
Telemetry System
voltage
Voltage Sensor
Info
Temperature
RPM Sensor
Switch
Info
Battery voltage is displayed
at the transmitter.
Info
Sensor
2017/08/02 14:17:40