Table of Contents
Advertisement
Push Dial to move to the activation setting options.
Model (MDL) is the default setting. Push the Return
(RTN) button to open the options, then scroll to the
ALWAYS setting using the Push Dial pad. Push
the Return (RTN) button once again to finalize the
selection.
Using the Model Select Function:
1. Turn ON the transmitter, activating the
Model Select screen. If Model (MDL) has
been selected, please be sure to push the
Model (MDL) sensor when powering up the
transmitter.
*Please note: Even if the Model Select function is active, the
Power Mode screen will appear when the transmitter is turned
ON while simultaneously pushing the Return (RTN) button.
2. The Push Dial is used to select amongst the
on-screen models. The current model will
automatically be highlighted when the
transmitter is turned ON. If a different model
is desired, use the Push Dial to scroll through
the available options; each highlighted
accordingly. Again, to select a model, push
the Return (RTN) button accordingly. The T12K
offers an audible and visual confirmation as
the selected model memory is changed.
66
<Functions of System Menu>
Advertisement
Table of Contents
