FUTABA T12K Instruction Manual page 147

●5-point curve setting (airplane)
[Curve rate setting]
1. Move the cursor to the curve rate setting
item (left side) you want to adjust and push
the RTN button to switch to the data input
mode.
Adjust the rate by scrolling the Push dial.
Adjustment range: -100%~+100%
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
Push the RTN button to end the adjustment
and return to the cursor mode.
2. Repeat this procedure for each point.
[Moving curve point]
1. Move the cursor to the curve point setting
item you want to adjust and push the RTN
button to switch to the data input mode.
Adjust the curve point by scrolling the Push
dial.
Adjustment range: Up to 2.5% in front of the
adjoining point
*When the RTN button is pushed for one second, the curve
position is reset to the initial value.)
Push the RTN button to end the adjustment
and return to the cursor mode.
2. Repeat this procedure for each point.
[Deleting/returning curve point]
Move the cursor to the curve point setting
item you want to delete/return and push the
RTN button for one second.
<Model Menu (Airplane/Glider/Multirotor Functions)> 147