FUTABA T12K Instruction Manual page 65

Assigning models to the sensor buttons:
There are four sensors/buttons that correspond with
the Push Dial: Link (LNK), Model (MDL), System
(SYS), and S1. As such, it is possible to offer up
to four models available through the Quick Select
function. We suggest using the models that you fly
most often.
1. Using the Push Dial, scroll to the desired sensor/
button for the first model, for example, Link
(LNK).
2. With the input next to the desired sensor
highlighted, push the Return (RTN) button one
time.
3. Using the Push Dial, scroll through the available
models. To select the desired model, push the
Return (RTN) button.
4. Repeat as desired for the remaining sensors.
Using the sensors to select the model:
1. Turn ON the transmitter, activating the
Quick Select screen. If Model (MDL) has
been selected, please be sure to push the
Model (MDL) sensor when powering up the
transmitter.
* Please note: Even if the Quick Select function is active, the
Power Mode screen will appear when the transmitter is turned
ON while simultaneously pushing the Return (RTN) button.
2. To select the model assigned to a particular
sensor, double-click the desired sensor. For
example, MODEL- 03 is assigned to S1, double-
click S1 to open all settings, etc. for Model
-03. The T12K offers an audible and visual
confirmation as the selected model memory is
changed accordingly.
* Double clicking the Return (RTN) button selects the model
that was selected the last time the transmitter was used. The
currently selected model is indicated on the display.
Model Select Screen
This allows the Model Select screen to be accessed
immediately upon turning ON the transmitter.
* Please note: this function cannot be utilized at the same time
as the Quick Select function. If more than four models are
flown regularly, we suggest that the Model Select function be
utilized as it will save time when selecting the desired aircraft.
If four, or fewer, models are flown, the Quick Select option
would be the best choice.
* Please note: the Model Select function does not allow access
to the RENAME, COPY, or DELETE options. To use one of
these options, access the Model Select screen.
1.The Start Selection (START SEL.) menu is
accessed through the T12K's System Menu.
Turn the transmitter ON and then push the SYS
(System) button two times. Use the Push Dial
to highlight the Start Selection (START SEL.) and
then push the Return (RTN) button to confirm
the selection.
2. The Start Selection (START SEL.) menu option
defaults to OFF meaning that Quick Select
and Model Select are not applicable. To
activate the Quick Select or Model Select,
use the Push Dial to scroll to the OFF setting as
denoted in the image. With the OFF indication
highlighted, push the Return (RTN) button and
rotate the Push Dial once again to scroll to the
Model Select (MODEL SEL.). Push the Return
(RTN) button once again to activate Model
Select as indicated.
Model Select Activation:
With the Model Select (MODEL SEL.) option
activated, there are two additional options available
for customization: ALWAYS and MDL (Model).
These options determine if/when the Model Select
information will appear on-screen. ALWAYS,
as the name suggests, indicates that each time
the transmitter is powered-up, the Model Select
information will appear on-screen. The MDL
(Model) setting indicates that the Model Select
information will appear on-screen only when
the MDL button is pushed simultaneously as the
transmitter is turned ON.
With the Model Select mode highlighted, use the
<Functions of System Menu> 65