Table of Contents
Advertisement
TH% Timer
TH% Timer is the function which changes progress of
a timer according to the location of the throttle stick.
When the throttle stick is raised for faster speed, the
speed of the timer usually increases. With the throttle
stick at mid-range speed, the timer speed decreases (to
50%). When the throttle is positioned at low end, the
timer's progress stops. It's possible to set the timer to
match your fuselage's fuel consumption.
Buzzer
●Timers sound two short beeps during the last
10% before reaching the target.
●If a target time is set and the timer reaches
the set time, a 1-second buzzer sounds.
Vibrator
●Vibrator is activated the last 10% before
reaching the target.
●If a target time is set and the timer reaches
the set time, vibrator is activated.
*The consumption of the battery/fuel is different
depending on the conditions, so use an TH% Timer
as reference.
*The TH% time is different from the actual elapsed
time.
If either Timer 1 or Timer 2 is set to TH%
mode, the model type icon is not
displayed and the% value of the timer is
displayed.
TH% Home Screen
If either Timer 1 or Timer
2 is set to TH% mode,
the model type icon
will not be displayed
a n d t h e d i s p l a y
position of the card
icon and key lock icon
will change.
High
Middle
Low
"--" ：Normal Timer
"TH%" ：
Start is 0%
"TH%" ： TH% Timer
Up Timer Screen
"--" ：Normal Timer
"TH%" ：
"TH%" ： TH% Timer
Start is 100%
Down timer screen
When set to TH% mode, timer value is
standard size and % value is displayed
in large size.
TH% Timer Screen
When a throttle stick is the
high side, the speed of the
timer usually increases.
When a throttle stick is
middle-speed, the timer
speed decreases (by 50%).
When a throttle stick is low,
timer progress stops.
<Appendix>
189
Advertisement
Table of Contents
