Hydraulic Specifications - Genie Z-60/34 Service Manual

November 2003
REV A

Hydraulic Specifications

Hydraulic Oil Specifications
Hydraulic oil type
Approximate SAE grade
Viscosity index rating
Chevron Rykon MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and have a minimum viscosity index
rating of 150. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable Petro Canada Premium ECO 46
Fire resistant
Mineral based
Genie specifications require
additional equipment and special
installation instructions for the
approved optional fluids. Consult
the Genie Industries Service
Department before use.
Part No. 75861
Chevron Rykon MV equivalent
5W-20
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Genie Z-60/34
Drive pump
Type:
Flow rate @ 2500 rpm
200
Flow rate @ 2500 rpm
Drive pressure, maximum
Drive pressure, maximum
Charge pump
Type:
Displacement
Displacement
Flow rate @ 2500 rpm
Flow rate @ 2500 rpm
Charge pressure @ 2500 rpm
Neutral position
Section 2 • Specifications
SPECIFICATIONS
bi-directional, variable
displacement piston pump
18.5 gpm
70.0 L/min
30.1 gpm
113.9 L/min
4200 psi
290 bar
3625 psi
249.9 bar
fixed displacement gear pump
0.37 cu in
6.1 cc
0.51 cu in
8.4 cc
4 gpm
15.1 L/min
5.5 gpm
20.8 L/min
250 psi
17.2 bar
2WD
4WD
2WD
4WD
2WD
4WD
2WD
4WD
2 - 3