Hydraulic Specifications - Genie Z-30/20N Service Manual

Section 2 • Specifications
SPECIFICATIONS

Hydraulic Specifications

Hydraulic Oil Specifications
Hydraulic oil type
ISO viscosity grade
Viscosity index
Cleanliness level, minimum
Water content, maximum
Chevron Rykon MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and have a minimum viscosity index
of 150. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable Petro Canada Premium ECO 46
Fire resistant
Mineral based
Use Chevron Aviation A hydraulic
oil when in ambient temperatures
consistently below 0°F / -18°C.
Use Shell Tellus T46 hydraulic oil
when oil temperatures consistently
exceed 205°F / 96°C.
Genie specifications require
additional equipment and special
installation instructions for the
approved optional fluids. Consult
the Genie Industries Service
Department before use.
2 - 2
Chevron Rykon MV equivalent
Multi-viscosity
200 ppm
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Genie Z-30/20N
Function pump
Type:
Displacement
200
Flow rate @
2800 psi / 172 bar
15/13
Hydraulic tank
return filter
Function manifold
System relief valve pressure
Primary boom down relief pressure
Secondary boom down relief pressure
Primary boom extend relief pressure
Models without rotating jib
Primary boom extend relief pressure
Models with rotating jib
Turntable rotate relief pressure
Auxiliary pump
Type:
Displacement
April 2005
REV B
Fixed displacement gear pump
0.183 cu in
2.1 gpm
7.9 L/min
10 micron with
25 psi / 1.7 bar bypass
2800 psi
193 bar
1600 psi
110 bar
1600 psi
110 bar
2800 psi
193 bar
1800 psi
124 bar
1100 psi
76 bar
Fixed displacement gear pump
0.3 gpm
1.14 L/min
Part No. 106373
3 cc