Hydraulic Oil Specifications - Genie S-40 Service Manual

Section 2 • Specifications
SPECIFICATIONS
Performance Specifications
All Models
Drive speeds, 2WD and 4WD
Drive speed, stowed
Drive speed, raised or extended
Drive speed, TRAX option
Drive speed, stowed
Drive speed, raised or extended
Gradeability
Boom function speeds, maximum
from platform controls
Boom up
Boom down
Boom extend
Boom retract
Turntable rotate, 360°
boom fully stowed
Turntable rotate, 360°
boom fully extended
Platform level (10° range of motion)
ANSI
CE/Austrailia
Jib boom up, S-45 models
Jib boom down, S-45 models
Braking distance, maximum
High range on paved surface
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
2 - 2
40 ft / 5.2 - 5.9 sec
12.2 m / 5.2 - 5.9 sec
40 ft / 40 - 45 sec
12.2 m / 40 - 45 sec
40 ft / 11 sec
12.2 m / 11 sec
40 ft / 40 sec
12.2 m / 40 sec
See Operator's Manual
50 to 60 seconds
45 to 60 seconds
30 to 60 seconds
15 to 35 seconds
70 to 100 seconds
120 to 140 seconds
3 to 5 seconds
20 to 22 seconds
35 to 45 seconds
20 to 30 seconds
3 to 4 ft
0.9 to 1.2 m
S-40 • S-45

Hydraulic Oil Specifications

Hydraulic Oil Specifications
Hydraulic oil type Chevron Rando HD MV equivalent
Viscosity grade
Viscosity index
Cleanliness level, minimum
Water content, maximum
Chevron Rando HD MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable
Fire resistant
Mineral based
October 2013
Multi-viscosity
200
15/13
200 ppm
Petro Canada Environ MV46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Chevron Aviation A
Eni Arnica 32
Part No. 102521