Test The Key Switch; Perform Engine Maintenance - Ford Models - Genie Z-60/34 Service Manual

November 2003
REV A
B-3

Test the Key Switch

Proper key switch action and response is essential
to safe machine operation. The machine can be
operated from the ground or platform controls and
the activation of one or the other is accomplished
with the key switch. Failure of the key switch to
activate the appropriate control panel could cause a
hazardous operating situation.
1 Pull out the red Emergency Stop button to the
on position at both the ground and platform
controls.
2 Turn the key switch to ground control, start the
engine and then turn the key switch to platform
control.
3 Check all machine function from the ground
controls.
Result: All machine functions should not
operate.
4 Turn the key switch to ground control.
5 Check all machine function from the platform
controls.
Result: All machine functions should not
operate.
6 Turn the key switch to the off position.
Result: The engine should stop and no functions
should operate.
Part No. 75861
Section 3 • Scheduled Maintenance Procedures
B-4
Perform Engine Maintenance -
Ford Models
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG-425 EFI Operator Handbook
Genie part number
To access the engine:
1 Remove the two engine pivot plate retaining
bolts. Swing the engine pivot plate out away
from the machine and secure it from moving.
Genie Z-60/34
CHECKLIST B PROCEDURES
Ford engine specifications require
that this procedure be performed
every 250 hours.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury
77831
3 - 19