Perform Function Tests; Perform Drive Hub Maintenance - Genie Z-60/34 Service Manual

November 2003
REV A
A-5

Perform Function Tests

Completing the function tests is essential to safe
machine operation. Function tests are designed to
discover any malfunctions before the machine is
put into service. A malfunctioning machine must
never be used. If malfunctions are discovered, the
machine must be tagged and removed from
service.
Complete information to perform this procedure is
available in the Genie Z-60/34 Operator's Manual
on your machine.
Part No. 75861
Section 3 • Scheduled Maintenance Procedures
A-6
Perform Drive Hub
Maintenance
Required maintenance procedures and additional
drive hub information is available in the
Rexroth Operation Maintenance Service Manual
(Rexroth part number GFT 7 T2 4030).
Rexroth
Operation Maintenance Service Manual
Genie part number
Genie Z-60/34
CHECKLIST A PROCEDURES
Rexroth drive hub specifications
require that this procedure be
performed after 10 hours of full
load operation.
89715
3 - 9