Checking Group Membership - 3Com NBX 100 Installation Manual

258 C 7: C
HAPTER ONFIGURING
Checking Group
Membership
D L C (T1, E1,
IGITAL INE ARDS
4 From the ISDN PRI Group List, select PRI Group 1.
5 Click Modify.
Figure 99 Digital Line Cards, Modify Group Window
6 Select Restricted from the Trunk to Trunk pull-down list.
7 Click the On Line check box.
8 Enter 500 in each of the four AutoExt text boxes.
9 Click OK.
To check that all channels are in the member list perform these steps.
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select T1 Group List.
3 Click Apply.
4 Select the group you want, and click Membership.
BRI C )
AND ARDS