Setting Ringing Patterns - 3Com NBX 100 Installation Manual

182 C 4: C
HAPTER ONFIGURING
Setting Ringing
Patterns
NBX 100 S -L
YSTEM EVEL
Table 33 System Timers Fields (continued)
Line Port Hold Timeout For a call originating on an outside line, the length of time
Call Park Timeout
Conference Timeout
Transfer Timeout
You can set system-wide ringing patterns to distinguish between internal
and external calls. You can choose one, two, or three rings to distinguish
between internal and external calls.
Do not confuse ringing Patterns with Ringer Tones, which NBX 100 users
can set for their telephones in NetSet. See "Setting a User's Ringer Tones"
on page 227 for information on Ringer Tones.
To set ringing patterns:
1 On the System Settings tab (Figure 48), click Ringing Patterns. The
Ringing Patterns window appears (Figure 53).
Figure 53 Ringing Pattern Window
S
ETTINGS
that the call remains on hold before it rings at the
extension that parked the call.
The length of time that a call can be parked before it rings
at the extension that parked the call.
The length of time that a ringing call continues to ring
before it call rings at the extension that transferred the call.
The length of time that a transferred call attempts the
transfer before it rings at the extension that transferred the
call.