Completing The E1 Installation - 3Com NBX 100 Installation Manual

Completing the E1
Installation
Figure 100 Digital Line Cards, Manage Group Membership Window
5 Scroll through the list to make sure that all 30 channels are present.
To complete the E1 installation, perform these steps.
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select ISDN PRI Channel List.
3 Click Apply.
4 Wait (approximately 30 seconds) for the status of each channel to change
from Ready to Idle.
While you are waiting, you can click Apply to refresh the list of channels
and see the updated status.
Configuring the E1 Digital Line Card 259