Preparing For Installation; Completing A System Plan - 3Com NBX 100 Installation Manual

Preparing for
Installation
Completing a System
Plan
CAUTION: To avoid damage to the Business Telephone, do not connect a
telephone directly to a standard telephone line. Although the RJ11
connector for a traditional telephone fits into the Business Telephone's
RJ45 jack, the electrical interfaces are not compatible and the telephone
will not work.
Figure 10 Business Telephone with DSS/BLF Adjunct
See the NBX Business Telephone Guide for more information about the
NBX Business Telephone and the DSS/BLF adjunct.
Before you begin installing the NBX 100, perform these tasks:
Complete a system plan
I
Order telephone lines
I
Develop a dial plan (if you choose not to use one of the provided NBX
I
100 system default dial plans)
Before you install the system, work with the client to develop a system
plan using the NBX 100 Communications System Planning Guide
(available on the NBX 100 Resource Pack CD). This guide enables you and
the client to specify the system configuration that best meets the client's
needs.
Table 5 summarizes the information that you should include.

Preparing for Installation

27