Re-Assigning Extensions And Setting Line Card Port Options - 3Com NBX 100 Installation Manual

170 C 3: I
HAPTER NSTALLING
Re-assigning
Extensions and
Setting Line Card Port
Options
NBX 100 H C
ARDWARE
To re-assign extensions and set line card port options:
1 Log on to NetSet using the administrator username and password.
2 Click the Device Configuration icon, and then click the Line Card Ports
tab.
3 Use the list of port addresses you created when you installed the line card
to determine the first port in chassis 1.
4 Select the MAC address of the first port in chassis 1, then click Modify.
The Modify Line Card Port window (Figure 46) appears.
Figure 46 Modify Line Card Port Window
5 Edit the line card port properties as needed. Table 30 describes the
properties.
OMPONENTS