3Com NBX 100 Installation Manual page 106

106 C 2: C D P
HAPTER ONFIGURING THE IAL LAN
DestinationRouteOperation Create
Description:
Creates a digit manipulation operation for a destination route entry. If the
specified digit manipulation operation already exists, this command
overwrites it with the new information. During routing the NBX 100
processes the entire list of operations in ascending nOperId order
(nOperId 1 first).
Syntax:
DestinationRouteOperation Create nRouteId nEntryId nOperId
szOperation szValue
Arguments:
nRouteId — An integer in the range 1 through 32768.
nEntryId — An integer in the range 1 through 32768 specifying the
destination route entry to which this operation applies.
nOperId — An integer in the range 1 through 32768. The NBX 100
processes the list of operations in ascending nOperId order.
szOperation — The name of the digit manipulation operation to perform.
One of the following: stripLead, stripTrail, replace, prepend, append.
szValue — A value used by the operation, either the string of digits to
prepend, append, replace with, or the number of digits to strip.
Example:
This example command creates, for Destination Route 3, entry 1, an
operation numbered 1, with the associated function stripLead, and an
argument of 1, indicating that the command removes (strips) one leading
digit from the dialed number before dialing.
DestinationRouteOperation Create 3 1 1 stripLead 1