3Com NBX 100 Installation Manual page 276

276 C 8: M
HAPTER AINTENANCE
, D , T
IAGNOSTICS AND ROUBLESHOOTING
Table 42 LUI Menu Items
Test
1 View Settings
2 Test - LEDs
3 Test - LCD
4 Test - Buttons
5 Test - Speaker
6 Test - Handset
Description
Use the scroll buttons to view the following:
Telephone MAC address
I
NCP MAC Address
I
All Fs indicates that the telephone responds to any
Network Control Processor, the default setting.
SW Build Ident.
I
Software revision.
Serial # and Rev
I
Device serial number and hardware revision.
My IP Address
I
Telephone IP address
Subnet Mask
I
Gatwy IP Address
I
Default gateway.
NCP IP Address
I
IP address of the call processor this telephone
communicates with.
Press the PROGRAM button to return to the main menu.
Turns on all LEDs for five seconds. Lets you quickly check
for inoperative lights.
Illuminates every pixel on the display for 5 seconds. The
display panel should look like the following image:
Puts the telephone in the button test state. Press any
telephone button to hear a tone and see a description of
the button's function. Press the PROGRAM button twice
to return to the main menu.
Sounds a tone through the telephone's speaker for five
seconds.
Sounds a tone through the telephone's handset for five
seconds.